The name "System 6“ stands for a modular system of solenoid coils, armature systems, solenoid operators and solenoid valves. The diameter of the armatures of
all valve components is approximately 6 mm. This value is the major characteristic of this type. The components‘ efficiency has been increased to the optimum in years of imulation, construction and practical testing.

APPLICATION OF SYSTEM 6
The solenoid operators and solenoid valves of System
6 can be used for operating 2/2- or 3/2 way valves.
Available switching functions are normally closed and
normally open. For 3/2 way seat valves of this series,
typical maximum values for operating pressure and nominal
width are 10 bar/1 mm. For 2/2 way devices, a
maximum operating pressure of 16 bar or a maximum
nominal width of 1.8 mm can be achieved.
The components of System 6 are mainly used as pilot
valves in pneumatics. The solenoid operators and
solenoid valves are designed for the use with compressed
air or other neutral gases. The use of other substances
is possible according to prior agreement with
nass magnet.

The name “System 8” stands for a modular system of
solenoid coils, armature systems, solenoid operators
and solenoid valves. The diameter of the armatures of
all valve components is approximately 8 mm. This
value is the major characteristic of this type. The
components' efficiency has been increased to the optimum
in years of simulation, construction and practical
testing.
APPLICATION OF SYSTEM 8
The solenoid operators and solenoid valves of system
8 can be used for operating 2/2- or 3/2 way valves,
especially in pneumatics. Available switching functions
are normally closed and normally open.
For 3/2 way valves of this series, typical maximum
values for operating pressure and nominal orifice are 16
bar/2.5 mm. 2/2 way solenoid operators and solenoid
valves can also be used for controlling liquids

The name „System 13“ stands for a modular system of
solenoid coils, armature systems, solenoid operators
and solenoid valves. The diameter of the armatures of
all valve components is approximately 13 mm. This
value is the major characteristic of this type. The
components‘ efficiency has been increased to the
optimum in years of simulation, construction and practical
testing.

APPLICATION OF SYSTEM 13
The solenoid operators and solenoid valves of system
13 can be used for operating 2/2- or 3/2 way valves,
especially in pneumatics and process technology. Available
switching functions are normally closed and normally
open.
For 3/2 way valves of this series, typical maximum
values for operating pressure and nominal width are 40
bar/5 mm. The solenoid operators and solenoid valves
are designed for the use with compressed air or other
neutral gases.
2/2 way solenoid operators and solenoid valves can
also be used for controlling non-aggressive liquids.

nass magnet offers components of the series “System 8”
and “System 13” suitable for use in hazardous environments.
Those have been tested and approved in accordance
to EN/IEC 60079 and DIN VDE 0170 (as defined in
directive 94/9/EG of the European Union) by the “Physikalisch-
Technische Bundesanstalt” (Federal Physico-
Technical Institute). Explosion prevention is granted, if
the specified and matched components from the catalogue
are used.

The so-called Tiny Tubes are our smallest valves.
Besides their small physical dimensions, they feature
respectable pneumatic power density and a long
life time. Even though they are not part of a modular
system, there is a versatile product portfolio of application-
specific “plug & play” solutions

The connectors are available as types A, B and C, and are tested according to CECC/EN 175301-803. Also available are the industrial and Micro variants. Due to our innovative connector technology, Assembly and installation of our magnetic coils are user-friendly.