EXAIR

Have a question? Make a request below

  1. n-GEn. Automation
  2. EXAIR




Our Products

alt
Exair

Vac- U- Gun

DO ENQUIRY


The Vac-u-Gun is a low cost solution to a wide variety of industrial housekeeping problems. The Vac-u-Gun is a vacuum gun, a blow gun and a transfer tool all-in-one. Lightweight and easy to use, the Vac-u-Gun has durable die cast construction with no moving parts to wear out....
DO ENQUIRYDO ENQUIRYDO ENQUIRY
alt
Exair

High Lift Reversible Drum Vac

DO ENQUIRY


Two-way pump provides maximum lift (up to 15 feet)!Move thick liquids (up to 1400 cP) through 20' of hose!...
DO ENQUIRYDO ENQUIRYDO ENQUIRY
alt
Exair

Chip Trapper

DO ENQUIRY


The patented* Chip Trapper offers a fast, easy way to clean chips, swarf and shavings out of used coolants and other liquids. The Chip Trapper vacuums the coolant or liquid that is filled with debris and traps all the solids in a reusable filter bag. Only the liquid pumps back out. It is ideal for use on machines with sumps, parts washers, tanks and storage containers of contaminated liquids. T...
DO ENQUIRYDO ENQUIRYDO ENQUIRY
alt
Exair

Chip Vac

DO ENQUIRY


EXAIR’s Chip Vac is used to clean chips from fixtures, floors & work surfaces of machining centres, lathes, saws, mills & other industrial equipment. The Chip Vac is suitable for either dry or wet chips & delivers them directly to an ordinary 55 gallon open-top (45 imperial gallons/ 205 litres) drum. Chip Vac has a powerful suction which is ideal for fast & efficient cleaning. For small job...
DO ENQUIRYDO ENQUIRYDO ENQUIRY
alt
Exair

Heavy Duty Dry Vac

DO ENQUIRY


EXAIR's Heavy Duty Dry Vac attaches to an ordinary 30, 55 or 110 gallon open-top drum to turn it into a powerful, industrial duty vacuum cleaner.The Heavy Duty Dry Vac has been engineered to vacuum more dry materials in less time with less wear....
DO ENQUIRYDO ENQUIRYDO ENQUIRY
alt
Exair

Heavy Duty HEPA Vac

DO ENQUIRY


EXAIR’s compressed air operated Heavy Duty HEPA Vac attaches to an ordinary 30, 55, or 110 gallon open top drum to turn it into a powerful, HEPA (High Effi ciency Particulate Air) quality, industrial vacuum cleaner. Like the Heavy Duty Dry Vac, it’s powerfully designed to move more material with less wear. In addition, the Heavy Duty HEPA Vac has been engineered to filter contaminant...
DO ENQUIRYDO ENQUIRYDO ENQUIRY
alt
Exair

Air Nozzles and Jets

DO ENQUIRY


Engineered Air Nozzles and Jets reduce noise levels and air costs. "Go Green" by upgrading your blowoff , cooling and drying operation to the award winning Super Air Nozzles...
DO ENQUIRYDO ENQUIRYDO ENQUIRY
alt
Exair

Heavy Duty Dry Vac

DO ENQUIRY


EXAIR's Heavy Duty Dry Vac attaches to an ordinary 30, 55 or 110 gallon open-top drum to turn it into a powerful, industrial duty vacuum cleaner.The Heavy Duty Dry Vac has been engineered to vacuum more dry materials in less time with less wear....
DO ENQUIRYDO ENQUIRYDO ENQUIRY
alt
Exair

Gen4® Super Ion Air Knife

DO ENQUIRY


A lower cost air knife solution where air consumption and noise level are not critical to the application. It offers 30% improved performance at low pressures allowing you to achieve the same or better results. • Eff ective up to 20 feet (6.1m) • 30:1 air amplification • Unlimited system lengths with couplers • Meets OSHA noise and pressure requirements...
DO ENQUIRYDO ENQUIRYDO ENQUIRY
alt
Exair

Gen4® Standard Ion Air Knife

DO ENQUIRY


A lower cost air knife solution where air consumption and noise level are not critical to the application. It offers 30% improved performance at low pressures allowing you to achieve the same or better results. • Eff ective up to 20 feet (6.1m) • 30:1 air amplification • Unlimited system lengths with couplers • Meets OSHA noise and pressure requirements...
DO ENQUIRYDO ENQUIRYDO ENQUIRY
alt
Exair

Gen4® Ionizing Bar

DO ENQUIRY


A low cost static eliminator which eliminates static cling! Compact, rugged design for applications where blowing air would disturb the production process. • Eff ective up to 4" (102mm) • Rapid static decay • Shockless, non-radioactive • CE compliant...
DO ENQUIRYDO ENQUIRYDO ENQUIRY
alt
Exair

Gen4® Super Ion Air Wipe

DO ENQUIRY


produces a uniform 360° stream of static eliminating ions. Ideal for static elimination on pipes, extrusions, cable and more. Neutralizes and cleans continuous moving surfaces! • Rapid static decay • Shockless, non-radioactive • No moving parts - low maintenance • Split design clamps easily around moving parts...
DO ENQUIRYDO ENQUIRYDO ENQUIRY
alt
Exair

Gen4® Super Ion Air Cannon

DO ENQUIRY


Quiet, efficient, concentrated flow of ionized air removes static and dust! Delivers concentrated flow of ionized air. Neutralizes static electricity and cleans at distances up to 15 feet (4.6m). • No moving parts to clog or wear out • Intake can be ducted • Variable force and flow • Meets OSHA noise and pressure requirements...
DO ENQUIRYDO ENQUIRYDO ENQUIRY
alt
Exair

Gen4® Ion Air Gun

DO ENQUIRY


Rugged, ergonomic static eliminating gun is a lightweight, effective. Ideal for dust removal on hard-to-reach parts prior to assembly, packaging, painting or finishing. • Electromagnetically shielded high voltage cable • Strong blowoff force and fl ow • Rugged and lightweight • Meets OSHA noise and pressure requirements...
DO ENQUIRYDO ENQUIRYDO ENQUIRY
alt
Exair

Internal Mix Atomizing Nozzles

DO ENQUIRY


- mix liquid and compressed air inside the nozzle to provide fine atomization. They can be used with liquids that have a viscosity up to 300 cP. Both liquid and air feeds require pressurization. • Ideal for creating fine mists for dust control and lubrication layers prior to packing • Available in multiple patterns and volume flows • All parts consist of Type 303 stainless ste...
DO ENQUIRYDO ENQUIRYDO ENQUIRY
alt
Exair

External Mix Atomizing Nozzles

DO ENQUIRY


- use independent air and liquid control to create a precise volume flow. They can be used on liquids with a viscosity above 300 cP. • Ideal for producing a high volume spray for heavy coatings or heavy particulate control • Available in multiple patterns and volume flows • All parts consist of Type 303 stainless steel for corrosion resistance and durability • CE compli...
DO ENQUIRYDO ENQUIRYDO ENQUIRY
alt
Exair

Siphon Fed Atomizing Nozzles

DO ENQUIRY


- are designed for applications where no liquid pressure is available. The can be used with gravity fed liquids or liquids from a siphon height as much as 36" (91 cm). They can be used with liquids that have a viscosity up to 200 cP. • Ideal where no liquid pressure is available and a thin coating of liquid is required • Available in multiple patterns and volume flows • All pa...
DO ENQUIRYDO ENQUIRYDO ENQUIRY
alt
Exair

No Drip Internal Mix Atomizing Nozzles

DO ENQUIRY


- perform like Internal Mix Atomizing Nozzles but have the added benefit of positively stopping liquid flow when the compressed air is shut off. They mix liquid and compressed air inside the nozzle to provide fine atomization. They can be used with liquids that have a viscosity up to 300 cP. Both liquid and air feeds require pressurization. • Ideal for creating fine mists for dust control a...
DO ENQUIRYDO ENQUIRYDO ENQUIRY
alt
Exair

No Drip Siphon Fed Atomizing Nozzles

DO ENQUIRY


perform like Siphon Fed Atomizing Nozzles but have the added benefit of positively stopping liquid flow when the compressed air is shut off. They are designed for applications where no liquid pressure is available. The can be used with gravity fed liquids or liquids from a siphon height as much as 36" (91 cm). They can be used with liquids that have a viscosity up to 200 cP. • Ideal where n...
DO ENQUIRYDO ENQUIRYDO ENQUIRY
alt
Exair

No Drip Siphon Fed Atomizing Nozzles

DO ENQUIRY


perform like Siphon Fed Atomizing Nozzles but have the added benefit of positively stopping liquid flow when the compressed air is shut off. They are designed for applications where no liquid pressure is available. The can be used with gravity fed liquids or liquids from a siphon height as much as 36" (91 cm). They can be used with liquids that have a viscosity up to 200 cP. • Ideal where n...
DO ENQUIRYDO ENQUIRYDO ENQUIRY
alt
Exair

VariBlast® Compact Safety Air Gun

DO ENQUIRY


Small and lightweight air gun with a variable flow trigger they are able to produce different force values from the same nozzle simply by pulling the trigger. • Durable cast aluminum body • Comfortable trigger action through full motion • Dual 1/4 NPT inlets to allow perfect positioning • Meets OSHA noise and pressure requirements...
DO ENQUIRYDO ENQUIRYDO ENQUIRY
alt
Exair

Soft Grip Safety Air Guns

DO ENQUIRY


Has durable cast aluminum body is suited for rugged industrial use and includes a convenient hanger hook for easy storage. Designed to accept a wide variety of EXAIR engineered nozzles and extension pipes. • Padded ergonomic design is ideal for hours of continuous use without fatigue • Large trigger for easy operation • Convenient hanger hook for easy storage • Meets OS...
DO ENQUIRYDO ENQUIRYDO ENQUIRY
alt
Exair

Heavy Duty Safety Air Guns

DO ENQUIRY


Features a larger compressed air inlet to accomodate higher powered nozzles. The durable cast aluminum body is covered by an comfortable composite rubber grip for extended use in demanding production line environments. • Wide, curved trigger for ease of use • Provides up to 3.3 lbs (1,497 grams) of blowoff force • Meets OSHA noise and pressure requirements...
DO ENQUIRYDO ENQUIRYDO ENQUIRY
alt
Exair

Super Blast Safety Air Guns

DO ENQUIRY


Engineered to work with EXAIR's Super Air Nozzle clusters. The large, comfortable grip is perfect for handling the higher force and flow of EXAIR's most powerful nozzles. • Ideal for wide area blowoff, cooling, and drying applications • Auto shut-off valve in case the air gun is dropped • Meets OSHA noise and pressure requirements....
DO ENQUIRYDO ENQUIRYDO ENQUIRY
alt
Exair

Back Blow Safety Air Guns

DO ENQUIRY


For cleaning out the inside of pipe, tube, hose or channels. EXAIR’s engineered back blow nozzle provides a powerful 360 degree airfl ow through an array of holes to remove coolant, chips or debris. Available in our VariBlast, Soft Grip, Heavy Duty or Super Blast version, each gun style can be outfitted with an up to 72" extension to reach far into your application and provide airflow. �...
DO ENQUIRYDO ENQUIRYDO ENQUIRY
alt
Exair

Super Air Knife

DO ENQUIRY


EXAIR Super Air Knife provides the best performance with a 40:1 air amplification ratio, making it the most efficient. It is the best choice for all applications. • Has a laminar airstream that is uniform, forceful and quiet. • Velocity is the highest of all three air knives. • Air consumption is lowest of all three air knives. • Compressed air inlets are provided on ea...
DO ENQUIRYDO ENQUIRYDO ENQUIRY
alt
Exair

Standard Air Knife

DO ENQUIRY


EXAIR's Standard Air Knife provides good performance with a 30:1 air amplification ratio that is less efficient than the Super Air Knife. It is a good choice when a less expensive alternative is required. • Has an airflow that is also uniform and forceful. • It is louder and uses more compressed air than the Super Air Knife. • Compressed air inlets are provided on each end. �...
DO ENQUIRYDO ENQUIRYDO ENQUIRY
alt
Exair

Full Flow Air Knife

DO ENQUIRY


EXAIR's Full Flow Air Knife provides good performance with a 30:1 air amplification ratio. The Full-Flow Air Knife is the least expensive and is a good choice for tight spaces. • Force is less than the other two styles. • IAir consumption and sound level falls between Super Air Knife and Standard Air Knife. • Compressed air inlet(s) are provided on the rear....
DO ENQUIRYDO ENQUIRYDO ENQUIRY
alt
Exair

Super Air Wipes

DO ENQUIRY


For Blowoff , drying, cleaning and cooling pipe, cable, extruded shapes, hose, and wire! Split design requires no threading! • Uniform 360° airflow • Aluminum models for temperatures up to 400°F (204°C) and Stainless steel models for temperatures up to 800°F (427°C) • Non-contact - no wiper blade • Meets OSHA maximum dead end pressure and noise requiremen...
DO ENQUIRYDO ENQUIRYDO ENQUIRY
alt
Exair

Standard Air Wipes

DO ENQUIRY


are good choices when the added durability of stainless steel screws, shims and hose are not required. • Creates a complete 360°; laminar blowoff • There is no contact with product - no wiper blade • Available in aluminum with coated screws and PVC hose • Complies with OSHA noise and pressure standards...
DO ENQUIRYDO ENQUIRYDO ENQUIRY
alt
Exair

Super Air Amplifier

DO ENQUIRY


Super Air Amplifiers are efficient & have the highest amplification ratios of all. Super Air amplifiers are compact, lightweight, portable & have no moving parts, assuring maintenance –free operation....
DO ENQUIRYDO ENQUIRYDO ENQUIRY
alt
Exair

Adjustable Air Amplifiers

DO ENQUIRY


EXAIR Adjustable Air Amplifier is used for a variety of applications - either aluminum or stainless steel for high temperature (400°F/204°C) and corrosive environments. Adjustable Air Amplifier is easy to mount and have good amplification ratios....
DO ENQUIRYDO ENQUIRYDO ENQUIRY
alt
Exair

High Temperature Air Amplifiers

DO ENQUIRY


The model 121021 High Temperature Air Amplifier was developed for moving hot air and to be able withstand high temperature ambient conditions....
DO ENQUIRYDO ENQUIRYDO ENQUIRY
alt
Exair

Ultrasonic Leak Detector

DO ENQUIRY


The Ultrasonic Leak Detector (ULD) is a superior instrument with high quality that can locate costly leaks in a compressed air system. The Ultrasonic Leak Detector is compact, lightweight & designed for one hand operation. Using the Ultrasonic Leak Detector a person need only aim it in the direction of a suspected leak. The LED display will light & an audible tone can be heard with the use of the ...
DO ENQUIRYDO ENQUIRYDO ENQUIRY
alt
Exair

Digital Flowmeter

DO ENQUIRY


EXAIR’s Digital Flow meter is an effortless way to observe compressed air consumption & waste. The exact amount of compressed air being used downstream is accurately shown on the digital display. Identifying costly leaks or inefficient air products makes it possible to save thousands of dollars per year in compressed air waste....
DO ENQUIRYDO ENQUIRYDO ENQUIRY
alt
Exair

Digital Flowmeterâ„¢ with wireless capability

DO ENQUIRY


EXAIR’s Digital Flowmeter with wireless capability is available as a built in option for EXAIR digital flowmeters. The easy way to monitor compressed air consumption and waste can now be done wirelessly over a ZigBee® mesh network! A radio module within each meter transmits data to an Ethernet connected gateway. Using the ZigBee mesh network protocol, data can be passed from meter to met...
DO ENQUIRYDO ENQUIRYDO ENQUIRY
alt
Exair

Digital Sound Level Meter

DO ENQUIRY


EXAIR’s Model 9104 Digital Sound Level Meter is an easy to use instrument that can measure and monitor the sound level pressure in a wide variety of industrial environments. The source of loud noises can be quickly identified and isolated so corrective measure can be taken to reduce or eliminate the problem. For compressed aire noise, it is often as simple as replacing the existing ineffici...
DO ENQUIRYDO ENQUIRYDO ENQUIRY
alt
Exair

Vortex Tubes

DO ENQUIRY


A low cost, reliable, maintenance free solution which converts compressed air into an effective and efficient spot cooling solution to many production problems. • Cold end temperature flow as low as -50°F (-46°C) • Hot end temperature flow as high as +260°F (+127°C) • Instantaneous cold air generation • Adjustable temperature • Meets OSHA noise and pr...
DO ENQUIRYDO ENQUIRYDO ENQUIRY
alt
Exair

Adjustable Spot Coolers

DO ENQUIRY


incorporates a vortex tube with a magnetic base and flexible hose to form an ideal workstation spot cooler. • Temperature ranges from -30° to +70°F (-34° to +21°C) • Flow rate can be adjusted from 15 SCFM (425 SLPM) to 30 SCFM (850 SLPM) • Helps prolong tool life • Meets OSHA noise and pressure requirements...
DO ENQUIRYDO ENQUIRYDO ENQUIRY
alt
Exair

Mini Cooler

DO ENQUIRY


incorporates a fixed output vortex tube with a magnetic mount and a one or two outlet flexible hose. Ideal for cooling tools running high speed operations like drilling or grinding. • Produces a stream of 20°F (-7°C) air • Prevents burnouts • Helps prolong tool life • Meets OSHA noise and pressure requirements...
DO ENQUIRYDO ENQUIRYDO ENQUIRY
alt
Exair

Cold Gun

DO ENQUIRY


The standard Cold Gun and High Power Cold Gun incorporate a vortex tube to convert an ordinary supply of compressed air (1) into two low pressure streams, one hot and one cold. (For completeinformation on vortex tube operation, see page 175 of this catalog.) Secondary air is drawn in (2). The Cold Gun's hot airstream is muffl ed and discharged through the hot air exhaust (3). The cold air (4) is m...
DO ENQUIRYDO ENQUIRYDO ENQUIRY
alt
Exair

NEMA 12 Cabinet Cooler

DO ENQUIRY


This type Cabinet Cooler systems are dust and oil tight. They are ideal for general industrial environments where no liquids or corrosives are present. • Provides clean, cold air to sensitive electronics • No moving parts - no maintenance • Easy to install through a standard electrical knockout • Durable aluminum construction with stainless steel vortex tube • CE...
DO ENQUIRYDO ENQUIRYDO ENQUIRY
alt
Exair

NEMA 4 Cabinet Cooler

DO ENQUIRY


This type Cabinet Cooler systems are dust and oil tight, splash resistant and indoor/outdoor capable. By incorporating a low pressure valve for all air exhaust, the valve closes and seals when not operating to maintain NEMA 4 enclosure integrity. • Delivers clean, cold air to electronic enclosures • Low pressure valves maintain NEMA 4 integrity • Consists of aluminum and Type ...
DO ENQUIRYDO ENQUIRYDO ENQUIRY
alt
Exair

NEMA 4X Cabinet Cooler

DO ENQUIRY


This type Cabinet Cooler systems are made from 303 stainless steel, dust and oil tight, splash resistant, indoor/outdoor capable and corrosion resistant. By incorporating a low pressure valve for all air exhaust, the valve closes and seals when not operating to maintain NEMA 4X enclosure integrity. • Delivers clean, cold air to sensitive electronics • Ideal for food service and corro...
DO ENQUIRYDO ENQUIRYDO ENQUIRY
alt
Exair

Line Vac

DO ENQUIRY


By using a small amount of compressed air to convert ordinary pipe, hose, or tube into a long distance conveyor. • No moving parts to clog or maintain • Ideal for hopper loading, fiber tensioning, trim removal, and material transfer • Available in aluminum and stainless steel for hygienic applications • Complies with OSHA noise and pressure standards...
DO ENQUIRYDO ENQUIRYDO ENQUIRY
alt
Exair

Threaded Line Vac

DO ENQUIRY


Threaded Line Vac provides the same outstanding performance as the Line Vac with the added benefit of common threaded fastening. The standard threading allows easy attachment to common plumbing pipe and fittings. • No moving parts to clog or maintain • Ideal for hopper loading, fiber tensioning, trim removal, and material transfer • Available in aluminum and durable stainless ...
DO ENQUIRYDO ENQUIRYDO ENQUIRY
alt
Exair

Heavy Duty Line Vac

DO ENQUIRY


• More than 50% higher throughput than standard Line Vacs • Ideal for transport of tougher materials • Fits standard hose, tube and pipe • Hardened alloy construction...
DO ENQUIRYDO ENQUIRYDO ENQUIRY
alt
Exair

Heavy Duty Threaded Line Vacs

DO ENQUIRY


provide the same powerful performance as EXAIR's Heavy Duty Line Vacs with the added benefit of common threaded attachments. The standard threading allows easy attachment to common plumbing pipe and fittings. • More than 50% higher throughput than standard Line Vacs • Easily attaches to ordinary pipe and fittings that can be found at hardware stores • Ideal for transport of to...
DO ENQUIRYDO ENQUIRYDO ENQUIRY
alt
Exair

Sanitary Flange Line Vacs

DO ENQUIRY


- are engineered to effectively convey large volumes of material over long distances in environments where frequent disassembly and cleanup is required. • ISO 2852 compatible • Fits standard sanitary flanges • Corrosion resistant type 316 stainless steel...
DO ENQUIRYDO ENQUIRYDO ENQUIRY
alt
Exair

Light Duty Line Vacs

DO ENQUIRY


- are engineered to effectively convey small volumes of material over short distances. The simplified design is sized to fit standard hose or tubing. • Lower throughput than the standard Line Vac • Simplified design provides effective conveying at a lower cost • Available in aluminum...
DO ENQUIRYDO ENQUIRYDO ENQUIRY
alt
Exair

E-Vac Vacuum Generators

DO ENQUIRY


EXAIR’s compressed air powered E-Vac is a low cost, compact alternative to traditional vacuum pumps in single stage designs. EXAIR's vacuum generators can be used to generate vacuum economically without a single moving part...
DO ENQUIRYDO ENQUIRYDO ENQUIRY